TOLL - FREE: 1-888-448-4422
LOCAL: 703-504-2000
FAX: 703-550-3755
EMAIL: contact@bluedoorpainters.com
LOCAL: 703-504-2000
FAX: 703-550-3755
EMAIL: contact@bluedoorpainters.com
Hear From Our Customers
Loading
-
“Blue Door Painting was professional and punctual in all aspects of the job. The estimator and crew were there when they said they would be there.”
Alexandria, VA
-
My Deck Is Made Of . . .
Do you know what your deck is made out of? Blue Door Painters can help you apply the right coat to protect it.
Outdoor Building Materials and How To Coat Them (Part Two)
Blue Door Painters, DC area coatings contractor, discusses the nature of various outdoor building materials – and the coatings that protect them.
My Deck is Made of . . .
. . . Cedar or Redwood
Is your deck naturally a warm, rich, reddish color? If so, it probably cost more to build than its green-blonde pressure-treated cousins – and it was probably worth it. Unlike the dry-climate conifers used in SPF and pressure-treated lumber, cedar – specifically, Western Redcedar – and redwood both come from trees grown in damp climates, which have developed natural moisture and rot-resistance. The heartwood of red cedar, for example (which is the part of the tree that has that beautiful reddish color), is infused with thujaplicin, a combination of related chemicals that have powerful anti fungal and antibacterial properties. Redwoods offer similar protection.
However, if your deck, fence, or siding is built from cedar or redwood, you need to make sure that it is constructed primarily – if not solely – out of heartwood. Heartwood is the wood located at the center of the tree, which is not actively engaged in nutrient cycling and metabolism. The active outer wood, called sapwood, has not developed rot-resistance because it is still protected by the tree’s living defenses. The larger the tree, the higher the percentage of heartwood – but with old growth forests dwindling and an increasing need to protect these resources, more and more cedar and redwood is harvested from newer growth tree farms. The percentage of heartwood coming from these younger trees is much lower, leading to wood that has neither the color nor the rot protection that has come to be associated with redwood and cedar.
If your exterior cedar or redwood is largely sapwood, it should be treated with the same care and attention given to SPF or other vulnerable types of wood: either stained and coated with a strong water-repellant sealant, and re-coated regularly, or primed and painted with a solid stain or appropriate wood-protecting exterior paint. If the wood project is heartwood, then it ought to be regularly stained and treated with water-repellant sealant to ensure that it retains its beautiful warm red tones (which will bleach out without re-staining), and that moisture does not warp or crack the boards.
. . . Composite Wood?
With all of the care and maintenance required for a natural wood deck or fence, the call has gone out to the innovative: can we manufacture a better alternative? The best answer on the market to date is composite wood. Created from a mixture of recycled plastic and wood chips or sawdust, composite wood is crafted to look like wood, but to share none of wood’s vulnerabilities. The plastic in the mixture protects the wood from rot and moisture-induced warping, and because the wood is factory-uniform, its performance is more reliable. Composite wood is easy to clean, and does not require the same degree of protection as its natural counterparts. For many, the benefits of composite wood outweigh the extra cost, artificial look, and colder feel of the material.
However, despite being heralded upon its arrival on the market as a “zero-maintenance material”, composite wood is still vulnerable to both mildew and color change if not properly protected. Due to its density, composite wood projects often develop small, tightly clustered pinpricks of mildew, and the color of the wood pulp included in the mixture will change in the elements just like any other type of wood. To ward off mildew, the use of a special composite deck sealer is recommended, in conjunction with periodic cleaning with a combination of bleach and water (pressure-washing with a composite wood mildew removing detergent is an ideal method of cleaning). And staining the deck every five years or so can correct the color change; just make sure you use a stain that is intended for use with composite wood products.
In conclusion, all wood-based outdoor building materials require some TLC, and applying the right coatings at the right time is a critical element of that care. Being in the know about your deck, fence, or siding, and its specific strengths and vulnerabilities, is the best way to maximize your relationship with your outdoor space.
My Deck Is Made Of . . .
Certain types of Spruce, Pine or Fur (SPF) may not hold up to the elements so well. Don't let your deck end up looking like this.
Outdoor Building Materials and How To Coat Them (Part One)
Blue Door Painters, DC area coatings contractor, discusses the nature of various outdoor building materials – and the coatings that protect them.
My Deck is Made of . . .
. . . “SPF”
Hopefully not. In the lumber world, ‘SPF’ does not refer to sunscreen: it is an acronym for ‘Spruce-Pine-Fir’, three kinds of lumber used interchangeably by builders for a variety of purposes. Depending on your region, the exact species of SPF wood will vary (Red Spruce, Jack Pine, and Balsam Fir typical in the west; White Spruce, Englemann Spruce, and Lodgepole Pine in the east, among many others), but all of them share similar characteristics that make them ideal for building. They all come from softwood conifers that are cheap to grow and harvest, and the finished lumber is reliably strong and workable.
The problem is, this type of lumber is NOT suitable for exposure to the elements. While buildings framed in SPF hold up perfectly well when the wood is protected by layers of insulation, siding, and drywall, exterior decks or fences constructed with SPF will rot at lightning speed. The quick-growing SPF conifer species produce lumber with wide, hungry pores which suck in ambient moisture and invite all types of rot, against which the lumber, adapted to a dry climate, has no natural defenses. Coating this kind of lumber, while it can buy you time, will not halt this deterioration completely.
So the best advice is, don’t build any outdoor construction out of SPF. If it’s too late, and you already have an SPF deck or fence that you won’t or can’t replace, your only hope is to coat it very aggressively, and re-coat it frequently as part of your routine upkeep. Consider using a few layers of stain followed by a fully waterproof clear-coat sealant, or select a hardy, weatherproof primer paint followed by a few layers of water-resistant topcoat. Make sure that all six sides of the wood are coated. The end grains, where all of the pores are cross-cut and exposed, are the most vulnerable, and it is well worth giving them a few extra layers if you want to hold your own in the battle against the elements.
. . . Pressure – Treated (PT) Lumber
If your deck is made of pressure-treated lumber, then you are in good company; pressure-treated wood has been one of the most popular outdoor building materials since the development of pressure-treatment in the 1940s. Frustrated with the vulnerability of the otherwise-convenient softwood lumber, Dr. Karl Wolman invented a procedure that drove artificial preservatives – antimicrobial and anti fungal chemicals – deep into the pores of the wood, so that moisture-borne rot could not easily take hold. The variety of softwood used for pressure treatment varies by your region – Southern Yellow Pine is the most common species used in the Washington, DC area – and the specific chemicals used to protect the wood varies based largely on when your deck was built. Until 2003, most companies used chromated copper arsenate to pressure-treat their wood, since it was (and remains) the most effective preservative available on the market. However, CCA’s toxicity to microbes and fungus extends to animals and children, and over the years a great deal of concern was raised over the long-term health effects of exposure to wood treated with CCA. The chemical has now been discontinued for use with residential lumber, and modern pressure-treated lumber is infused with alternative, less toxic chemicals.
Coating a pressure-treated deck or fence is of the utmost importance, both to extend the life of the wood and to protect against exposure to the preservatives. If you have an older deck, the EPA recommends applying a penetrating oil-based finish to block human exposure to CCA. Many companies offer clear preservative coatings that are intended for use on fresh pressure-treated wood; these sealants should be used immediately to guarantee ideal protection. However, it is essential that you find a product intended for use on fresh pressure-treated wood, and you wait one to two months before applying any further paint or staining. The reason is that fresh pressure-treated wood has moisture in it from the PT process that takes a while to dry out, and if you coat it while your project is still wet, both the coating and quite possibly the wood itself will be destroyed. Once you have sealed your fresh PT project and given it adequate time to dry, staining or painting your wood with products intended for use with PT wood will give it the extra protection needed to ensure true longevity.
Stay tuned for the skinny on Redcedar, Redwood, and Composite Decking.
How Can I Protect My Deck From Snow?
Protect your deck and beware of rime ice!
Tips for winter deck care from Washington, DC / Northern Virginia area painting and deck staining contractor.
Early in the morning, you peak out the window to behold a winter wonderland. Your front lawn is a pristine sea of sparkling white. Your sidewalk is a pristine sea of sparkling white. Your back deck is a pristine sea of sparkling white….
Wait a minute: Is that okay?
Without protection, decks take a beating from the elements. Heat and cold, sun and rain, will all weather your deck at an accelerated rate. All four seasons bring unique challenges to exposed wood: summer brings heat and sun, spring brings excessive rain and drastic temperature changes, and fall brings the tannins of all the fallen leaves. Winter brings frosty cold – and with it, the great array of cold-weather precipitation: snow, ice, and sleet.
Of these, ice rime is the only one that you really need to worry about. Snow and sleet will add moisture to the deck, and cold temperatures will take their toll, but nothing acute will go wrong during a snowstorm, no matter how many inches of snow you get. Decks are very strong, and can survive even a serious blizzard. Ice rime is a different creature, however. Without proper finish to the wood, a solid layer of ice can work its way into cracks and pores in the wood, and the expansion and contraction that comes with freezing and thawing can lead to splintering. A good deck sealing job in the fall can go a long way to protect against this situation. If sealing or resealing your deck is a job that you put off for the spring, however, and you look out your window and want to clear a layer of ice from your deck, (or if you would like to be able to safely traverse it), you should follow these tips:
1. Do not chop ice with a shovel; the blade of the shovel can damage the wood
2. Melt the ice with rock salt, calcium chloride, or an environmentally friendly alternative
3. Shovel any snow, slush, or other wintry debris with a plastic shovel, using strokes that move along the boards, not cutting across them (the edge of the shovel may catch on the edges of the boards and damage them)
Generally speaking, unless you get a large tree trunk coming down, a single winter weather event will not be sufficient to damage your deck, so if you want to leave it as a pristine winter wonderland, go ahead. It is the cumulative effect of all four seasons that wears out a deck that hasn’t been properly stained and sealed. If this is something you find yourself worrying about this winter, why not consider staining it when the weather gets better in the spring? It might do wonders for your deck’s beauty and durability – and, next winter, for your peace of mind.
Why Should I Pressure Wash?
The benefits of power washing technology for exterior projects in the Washington, DC area
Again and again, painting and refinishing contractors in the Washington, DC area are asked the same question: Why did my paint/stain fail?
Most of the time, the answer is the same. It failed because the surface was inadequately prepared. And usually, inadequate preparation translates directly to inadequate cleaning. Dirty surfaces clogged with loose particles do not provide the constant, sturdy surface that paint needs in order to form a film, or stain needs to evenly penetrate.
Many techniques have been developed for cleaning and preparing substrates, but for exterior surfaces there is nothing on the market superior to the pressure washer (also called a power washer), for cleaning speed and effectiveness. Employing a thin jet of high-pressured water, which can be manipulated to be focused or diffuse, the power washer can be used to remove dirt, grime, mildew, grease, and other stains from exterior surfaces like decks, siding, driveways, patios, concrete foundations, and stonework, all with stunning results. The weather in the Washington, DC area, with its long, humid summers and its intense winters, takes a distinct toll on exterior surfaces (as well as their paint and stain jobs), making pressure-washing doubly important.
Blue Door Painters includes power washing with all of our exterior repainting and staining/sealing projects, so that we can ensure the best possible long-term results for our work. Pressure washing all on its own can greatly beautify an exterior surface, however, even without a subsequent new paint or stain job. Pressure washing an old deck, for example, brings about drastic results: the jet of water slicing right through years of grime and mildew, instantly turning the wood from gray to gold. Just be warned: the beautiful results won’t be permanent without a protective coat of paint or stain to protect the freshly cleaned surface.
So to recap: why should you power wash? Because you want to give the exterior of your home or building the best possible protection against the elements, and you recognize that thorough cleaning is an integral step in that procedure.
Can I Stain Pressure-Treated Wood?
Tips for Staining Decks and Other Exterior Surfaces in Washington DC and Northern Virginia
Wood is a strong and beautiful organic building material with one key weakness: being organic, it is vulnerable to organic decay. The properties of different kinds of wood are totally determined by the properties of the trees they were lumbered from. Some trees, like cedar and redwood, have their own innate resistance to bacteria, fungus, and insects, but many of the common softwoods used for decks do not. Pine, for example, which is a sturdy and easily lumbered variety of wood, lacks resistance. When raw pine is exposed to the elements in an exterior environment, it will fall prey to decay within a couple years.
One classic solution to wood’s vulnerability is to paint or stain the wooden exterior surfaces, so that the wood takes on the waterproofing and element-resistance of the chemical paint and stain. For the most vulnerable wood exteriors, however – like decks constructed from pine or douglas fir – providing surface protection is not sufficient to get long life out of a deck. Pressure treatment is a technique that has become popular because it offers a deeper level of protection.
Pressure-treating involves bathing the lumber in preservative chemicals, and then subjecting the wood to intense pressure, so that the preservatives become deeply infused into the wood. The most common chemicals used in pressure treatment are water-borne copper mixtures like chromate copper arsenate (that is the preservative that creates the familiar greenish tinge in exterior wood), alkaline copper quat, micronized copper quat, and copper azole. With pressure-treated wood, chemical resistance is borne deep into the pores, lending added protection to the wood’s interior.
However, just because the wood is pressure-treated, does not mean that it does not need to be stained as well. While the pressure treatment system is remarkably thorough, some spots will inevitably be missed, and the rot that sets in will slowly but steadily decrease the life of your deck. Staining pressure-treated wood can both extend the life and amplify the beauty of your exterior deck landscape.
The catch is, you can’t do it immediately. Because you can’t do it while the wood is still wet. Even when the wood is bought freshly from the store on a sunny day, if it is pressure-treated, you should assume that it is wet. This is because pressure treating by itself makes wood wet. The water that carries the preservative chemicals into the wood is driven in so deeply that it takes 30-60 days to dry fully – the exact drying time determined by the temperature and humidity.
Staining pressure-treated wood while it is still internally wet from the pressure-treatment process is one of the critical mistakes that leads to stain and paint failure on exterior surfaces. The moisture pushes out against the film or stain, forming bubbles in the coating, and the moisture locked into the wood encourages mold to grow, counteracting the very purpose of the preservatives and stain.
So the moral of the story: YES, go ahead and stain your pressure-treated deck (or fence!) – but wait 30-60 days first.
